24 Sep

Loft conversions are popular with Oxford Architecture

It is the general consensus that with a loft conversion there is only one type of design, in reality though there are many types of designs for loft conversions. Architecture Oxford companies specialise in designing unique loft conversions for their clients; here are a few of the designs available.

The most simple and perhaps most common type of loft conversion is known as the roof light conversion. Basically this is where windows are installed into the roof to allow natural light so it becomes a living space and not just an attic. There are different kinds of windows you can have installed; talk to your Oxford architecture company about the different designs and if planning permission will need to be granted.

There is also the dormer conversion; this is becoming more and more popular with terraced houses. This design focuses on increasing the height of your loft so that your converted room benefits from good ceiling height; to do this the roof line will have to be extended. Your Oxford architect should research and see if planning permission will need to be granted for a dormer conversion; you do not want to start without receiving permission first.

There is a loft conversion which involves changing the side of a roof from a hipped shape to a gable end which gives more room in the loft; this is known as a “Hip to Gable” conversion. Your Oxford architects should draw up designs of how they think the new room should be used.

There are a variety of loft conversions available nowadays; however it’s important you choose a design that compliments the infrastructure of your home; consult with your Architecture Oxford Company before deciding a design. Your architects Oxford will know which loft conversion designs will work for your home and which designs will not.

After you have looked at the different loft conversion designs with your architects and chosen the most suitable one for your house you then need to decide what kind of room you’re going to have in your loft conversion. Will it be an extra living space, bedroom or bathroom; you need to consider which type of room will give the most value to your property. You should discuss this factor with both your Oxford architecture team and local estate agents in the Oxfordshire area. Loft conversions tend to add 30K value to a home but they can add as much as up to 150K in area with expensive terraced housing.

23 Sep

Traditional Architecture In India.

Now a day’s in india traditional architecture is the widespread form of building since many years, constructed through traditional way of building methods by local builders without using the services of a professional architect. Due to western influence, architects in india are not using traditional architecture techniques now that are based on indian climatic conditions. In India, building materials has different categories from mud-plastered to reed-thatched to timber-framed in accordance with the availability of local material. Some houses are built to withstand earthquakes, while others can be rebuilt quickly if washed away by heavy monsoon rains.

Materials used for it:

In some areas where there are limitations of building material, natural materials such as mud, grass, bamboo, thatch or sticks are used, instead of transporting materials from far place which is a blot on sustainability practices, for semi-permanent structures which require regular maintenance and replacement. The advantages of such traditional architecture are the construction materials are cheap and easily available and relatively little labor is required.

As the needs and resources of the people change, vernacular architecture evolve to include more durable materials such as stones, clay tiles, metals etc. Though they are more expensive to build, they are very durable structures.

Climate has a major influence over traditional architect:

In India climate has a major influence on traditional architecture. High thermal mass or significant amounts of insulation characterize buildings in cold climates. Lighter materials are used to built buildings in warm climates and designed for sufficient cross-ventilation through openings in the fabric of the building. In areas which have high levels of rainfall, flat roofs are avoided, even in areas with flat roofs, water harvesting techniques are being used.

About iDream:

iDream is a International Class Architectural & Interior Design Firm offering its services in India and across the Asia Pacific region through an alliance. Set up in the year 2003, iDream brings together a resource pool of senior industry professionals with over two decades of experience in handling major projects in formats like “Design Consultancy”, “Project Management Consultancy” and “Design & Build”, across the globe

For more information log on to:

20 Sep

Commercial Grade Large Planters For Your Restaurant

Restaurant planters or hotel planters are usually large, elegant, and functional. Their unusual sizes are not only for style but for a purpose. They can serve as a boarder or a liner for the restaurant’s outdoor setting. Instead of putting fences or railings, large planters are more trendy and can add beauty to the restaurant.

Large fiberglass planters are the most commonly used planters in commercial establishments. Fiberglass are lightweight and durable which makes them ideal for outdoor settings. Some would even use big planters on casters so that it can easily be moved when they change their outdoor arrangements.

Most restaurant planters today are not only used as an ordinary containers for plants nor a restaurant decoration. Four of the top grade restaurant planters that combine function and style for restaurants today are as follow:

Coronado Premier Planters
These large commercial planters are used by the well-known Hotel Del Coronado, one of the oldest wood hotels. It is 36 inches long and 13 inches wide which are perfect for outdoor dining areas because they won’t occupy too much space. It looks like wood but it is actually made of Premium Cellular PVC.

Good thing about PVC is that guests cannot really tell that the large planters are not real wood. The material is durable compared to real wood because it won’t rot and can withstand bad weather conditions. They can also be painted with any color and can easily be cleaned.

Capri Rectangle Flower Planters
The Capri Rectangle Flower Planters are very simple yet innovative and elegant. They create an illusion of floating slightly above the ground. The compartment of these large planters are larger than the supportive footprint underneath.

The Capri Planters come in a variety of textures, colors, shapes and finishes that compliments any plants, flowers, bushes, and even trees. They are slightly bigger than the Coronado Premier Planters but they can be ordered in custom sizes.

Cairo Vase Planters
The Cairo Vase Planters has long been used in ancient Egyptian time. Their exquisite beauty and elegance perfectly fits in classical themed restaurants or luxurious dining areas. They may not be too functional compared to the Coronado and Capri Planters but with its charming appearance, you can have an unusually large vase as a centerpiece in any indoor or outdoor setting.

Custom planters for the Cairo Vase planters are also available. So they can be made in medium or small sizes which can be placed anywhere as a group to accent restaurant doorways, reception areas, and other spaces.

Valencia Round Fiberglass Planters
These are commercial grade planters that has the classic Mediterranean style that can be refreshing for outdoor restaurant settings. The Valencia Round fiberglass planters are highly durable and resistant to any possible damages like staining, scuffing, or wearing off. These round planters have small circular footprint that can occupy less space in your restaurant.

Large Commercial Planters are of high quality which makes them long lasting. They will be a good investment for any commercial establishments not only in terms of function but also in attracting more clients or customers.

16 Sep

Autodesk Revit Architecture 2011 Review

Buildings informational modelling (BIM) from Autodesk Revit Architecture 2011 may be the a fresh high engineering, which connects architects, developers and constructors. BIM engineering allows to formulate and talk, successfully create digital models at any period of method, to review behaviour of buildings in real conditions due to creation and using of coordinated, unified and connected designing information.

This post is used for producing essential selections, formation high-quality engineering specifications, operational characteristics predicting, an evaluation of expenditures and civil work planning, and then for creating infrastructure management.

Revit Architecture 2011 provides chance to focus on the main thing – the creative portion of buildings designing. You are able to assist model in different convenient rendering, easily and rapidly make changes, get ready working drawings on the basis of 3D models. Three-dimensional views will help to present your ideas towards the client a lot more visually. Even at past due periods building model customization will not bring any difficulties, because all cuts, facades, specifications along with other files are up-to-date immediately.

The building informational modelling supplies the full method of the structure designing due to electronic reproduction of actual construction process. You train with an uniform model, avoid separate files. The design parametrical changes technologies ensures coordination of all interconnected elements of the project – from types of models, cuts and plans approximately sheets of drawings and specifications.

The first type of a building is established from simple form building components in Autodesk Revit Architecture 2011 ; they can be received through the volume geometry created in Rhino, Sketchup, AutoCAD, 3D MAX, etc. In Architecture 2011 the imported objects are transformed to objects of the architectural composition, which then are transformed to objects to construct designing – walls, roof slopes, overlapping and safeguarding frameworks.

In Revit Architecture 2011 all 2D and three dimensional views, drawings and specifications are representation of the building database. All modifications extend on all model simultaneously, including the design documentation.

Autodesk Architecture 2011 will help you considerably reduce time and practical information on projecting, and also to improve quality of designing. Demonstration videos and interactive presentations will present link between your projects visually realistically. Revit Architecture offers architect several advantages both for private and group.

15 Sep

Trash Style DIY Garden Fence Color

You shouldn’t be upset as to what I am just going to point out. Check out this dining room permanent fixture? Perhaps you have one the same as it, or perhaps equivalent. Possibly it looks fantastic inside your area! I simply can’t stand this in acquire.

It isn’t that there is everything really completely wrong by it. Just a “builder blah” fitting. Whenever My partner and i glance over at it (for more than 2 1/2 many years!) I think, “That’s not right.In . Lol. As though I haven’t got greater things to think about.It simply isn’t really my personal type. I became following something a little more exclusive. Something a little…junkier.

We have imagined many times about getting the idea down entirely along with clinging my personal builder container wrought iron chandelier here. But we’re hiring this kind of house, and i also merely could hardly acquire absolutely determined to accept the light fixture straight down realizing I’d have to put it back up when we shift. You know me-I also was not planning to spend anything to get or even come up with a brand-new fixture!

A couple of times ago I used to be considering some sites as well as thinking of how much I really like the shape and search of the drum hue over the dining table and also motivation arranged! What if I produced my form of a drum hue formed include to slide over the bulb I would not such as? It took me concerning Thirty seconds involving careful consideration before We hopped upwards and started snagging jointly several feasible supplies for my concept.

My spouse and i found this specific previous garden chicken wire fencing coming from a kerbside rubbish pile final Spring. We’ve made a number of other dangling chandelier type tasks by using it, so I thought this can be an excellent start with regard to something which I really could help to make sufficient to slide throughout the limit light fixture. I believed away what number of solar panels it would decide to use work with this along with utilised needle nostril pliers to get in touch the actual pieces to one another securely inside a group. I also had a huge discard regarding white-colored textile during my stash. I thought we would dissect that directly into pieces and also very hot fixed them throughout the in my personal trash yard secure chicken wire fencing body therefore the rather type of the metallic would likely display on the exterior with the hue.

Following this, items received a small unappealing. We has not been certain the way i was going to attach the colour tone to the fixture. In the beginning my own child and I attempted with similar material strips, braiding these people in the wall hue for the heart ceiling string.I couldn’t make back garden fence framework maintain it can be rounded condition, and also the material whitening strips on the inside of the actual shape ended up at first considerably longer. The entire thing had been beginning to appear like the particular mummy satisfies a giant octopus!Next, another idea. I had acquired 2 inexpensive hula dancing hoops from Huge Tons once we have been throughout California. Let’s say My partner and i attach the particular rubbish kennel area color to a cloth twisted hula dancing hoop therefore it hold it really is shape? Good plan correct? Until our 6 year old kid taking walks in to the kitchen and also sees mommy sticking fabric strips for you to their hula basketball hoop.Well, a few unhappy occasions (as well as the promise of one more hula basketball hoop) later, he and I were excellent, the master plan had been implemented also it worked! Considering that tying cooler areas for the light fixture string along with material whitening strips only appeared also careless, I needed to develop yet another option. I’d this particular connect along with a few items of string attached on another dangling item My spouse and i created (but has not been being utilized) as well as made the decision this was a significantly tidier alternative. simply hung your catch directly on your sequence. The shade isn’t really weighty in any respect, to ensure has not been very important.

12 Sep

Modern Architect Revolutionizing The World Of Architecture

Simply put, modern architecture is a kind of style found in the building structures that have simple form without any ornamental structures to them. In actual, this style of architecture was first introduced around 1900. By 1940, modern architecture was recognized as an international style and became the most common way to build for many decades in the 20th century. Modern architect applies scientific and analytical methods to design.
According to many historians, the origins of this style of architecture is related to the social and political revolution of the time, though others see modern architecture as primarily driven by technological and engineering developments. Of course, the availability of a range of materials such as steel, iron, concreteand glass brought about many new building techniques as part of the industrial revolution. There is a group of people who regard modern architecture as a reaction against ancient building style. Above all, it is most commonly liked as a matter of taste.
Well, for the international style, the widely popular used materials are glass for the facade, steel for exterior support, as well as concrete for the floors and interior supports. In fact, the floor plans are logical and functional. However, most of the individuals are not fond of the modern style.In general, these people find its stark, uncompromisingly rectangular geometrical designs quite inhumane. Yes, they actually think this universal style is elitist,sterile and lacks meaning.
It has been observed that modern architecture challenged traditional ideas about different types of structures perfect for architectural design. Only important civic buildings, churches, public institutions and aristocratic palaces had long been the mainstay of architectural practices. However, modernist designers quite oftenargued thatmodern architect should design everything that was necessary for society, even the most humble buildings.
In a very short time, architects started to plan low-cost housing, factories, railroad stations, warehouses, and commercial spaces as well. And, in the first half of the 20th century, modern architectbegan to produce furniture, textiles, and wallpaper – as well as designing houses in order to create a totally designed domestic environment. The main thing is that the aesthetics used by modern architects celebrated function in all possible forms of design, ranging from household furnishings to massive ocean liners and new flying machines as well.
Modern architect first came up in the United States and Europe and spread across the rest of the world. The major characteristic features that made this kind of architecture possible were stylistic movements, buildings, technology, and modern materials as well.

12 Sep

How To Build Your Own Intermittent Misting System To Propagate Plants

This article will lay out the steps and materials you need to build your own misting system to propagate plants.

How to build your own misting system

Here is a list of materials and quantities needed to build a basic misting system. This system is designed to be used outdoors, but should also work fine inside a greenhouse. Your choice of misting nozzles will determine whether your PVC pipe will be suspended above the cuttings, or lay on the ground. This list assumes you are using a digital timer. WARNING: Use extreme caution if using mechanical timers instead of the digital one. The voltage can cause injury or death. If you are not qualified to perform the required wiring, seek the help of a qualified electrician. If using a digital controller, most convert the incoming voltage to a lower voltage, so there is less of a danger, but seek advice from an electrician if needed.
Misting controller(s) (1) (2, if building the mechanically operated system)
110 volt AC to 24 volt AC transformer (1) (will not be needed if using the digital timer)
24 volt AC solenoid (1)
Wire for solenoid (length determined by system builder)
Wire for timers (only if using the mechanical timers)
3/4 PVC pipe (10′ length)
3/4 socket x 3/4 male IPS adapter (1)
3/4 male IPS x female hose adapter (1)
3/4 PVC glue on cap (1)
misting nozzles (4)
Waterproof wire-nuts (2)
9 volt batteries (for digital timers only)
PVC primer and cement
Teflon tape
Misc. electrical fittings (only if building the mechanical system)Step 1
Install the two 3/4 male adapters into the solenoid. Be sure to wrap Teflon tape around all pipe threads to reduce the likelihood of leaks. The 3/4 x female hose adapter should be installed on the inlet side, the 3/4 male IPS x 3/4 socket on the outlet side. Most solenoids have a direction of flow arrow to help you determine which end is the inlet, and which is the outlet. Be sure to not over tighten the fittings, or the solenoid may crack.
Step 2
If building the digital timer system, wire the controller to the solenoid, using the wiring directions that came with the controller. Be absolutely sure the transformer and solenoid are the same voltage. Use the waterproof wire nuts to connect the solenoid to the wire. If building the mechanical system, the timers need to be wired together, then to a transformer. The transformer then gets wired to the solenoid using the wire nuts. Seek the help of a qualified electrician to be sure your mechanically operated system is wired correctly.
Step 3
Prime and cement the 3/4 PVC cap on the end of the PVC pipe. Prime and cement the other end of the pipe into the fitting in the solenoid. Do not get any cement in the solenoid.
Step 4

11 Sep

A variety of Garden Bridges for your backyard

A variety of Garden Bridges for your backyard
The most soothing place in the house is the backyard because of plantation and beautiful flowers. Moreover, water elements also help bring life to a backyard. Bridges not only enhance the beauty of such features, they add accessibility. To adorn the look of the backyard, many people think of landscaping. Some consider it to be a tiresome job to add more elegance to the already treasured garden. However, there are a few individuals who just love to change the backyard dcor, perhaps by considering including a water piece, such as a man made stream or pond. This idea is commonly installed for its peace and serenity feel in modern back yards. Dont you think there is a necessity to introduce another special idea that might transform the entire area into a truly spectacular place to spend time in? You should try and install garden bridges.

Do not consider these bridges as an overpass area for the motorists to use. It is not a short cut to walk out of the house through the back door. This miniature version of bridges is basically foot bridges that are used to cross the small pond in the backyard. Also known as landscaping bridges, they give a unique look and style to the most visible feature in your home garden. Whenever you feel like going for a walk in a garden, you can visit your backyard. In todays modern world, the landscape bridges have become an all-time favorite form of garden decor. Apart from that, they also add value to the garden section, and might prove to be one of the causes to increase your property value.

You can purchase these garden bridges from California-based Redwood Garden Bridges. Owner of Clovis, Redwood Bridges, Joe Guraro ensures that the bridges for dry creek, Koi ponds Japanese Gardens and Landscaped Yards are high quality and fish-safe. The design process starts with a series of questions such as will the bridge need to accommodate the elderly or young children? How often will it be used? How much weight should it hold? With this, the company promises to craft a well-constructed, safe product without the use of pressure-treated woods. There are several designs available on the site, allowing the homeowners and interior designers to select with ease. You will find a variety of bridge styles, railing types, and accessories to achieve the look that you desire to have.

Bridges can arch high over pools to leave room for swimmers or sit low over koi ponds, reflecting light into the water from solar post caps. Depending on your backyard area, you can opt for the short or long bridge, which is available with a minimum span of 4 feet and a maximum length of 40 feet. The custom-built bridges are developed by using material options such as California redwood and composite lumber. Hence, you should be assured about the quality control.

So, what are you waiting for? Make your garden look elegant and beautiful with redwood foot bridges.

5 Sep

Backyard Bog Gardens How to Build your Own

The benefits of a water-based garden are numerous from attracting wildlife, to providing an environment for different types of plants that you might otherwise not be able to accommodate, however, you may wish to build a pond in your garden and the presence of small children or animals does not permit it.

Bog gardens are an excellent alternative in this respect, as flooding deep enough to pose a threat of drowning would not sustain many of its staple cultivars. You could opt to fill in an existing leaky pond and plant it up, but if you are creating a bog garden from scratch, you should aim for an area that gets full sun, although some pockets of shade are acceptable. The size is entirely up to you of course, but you should dig down at least about 45cms to allow plants to form good root systems. If youve decided to convert a section of lawn for your bogs location, then you can save on lining materials by recycling the existing turf.

Simply cut sections using a spade and lay them butted up, grass side down into the bottom of the hole. If this is not the case then you can either use standard butyl or plastic liner as you might in a pond, or, if you dont mind getting your hands dirty (which as a gardener I assume you dont), then you could line in a more traditional manner with wet clay. If you are using pond liner, pierce it at every metre with a pitchfork to allow for drainage and weigh the edges down with bricks to prevent it shifting underfoot, but whatever the material, your liner should fall at least a few centimetres below the rim of the bog so that excess water can escape over the top. Dont trim it though until youve partially filled with soil, as the weight of the soil will pull it down in the hole. Put a layer of gravel in the bottom and then you can back-fill with your excavated soil after removing any weeds and large stones. If your soil is poor you can add a little organic matter to give your plants a good start.

Finally, you come to the key ingredient of the bog – water. Ideally a bog should be filled with rainwater to ensure a minimum of detracting chemicals, so, if youve a rain barrel or a friend with one, now is the time to use it. If this is too impractical then regular tap water will suffice, however, it will be most effective if given a few days to stand and evaporate its chemical element.

With your lining, base soil and water established, you ought to allow a day or so for the soil to settle and then crack straight on with the planting phase. Below youll find a small group of our favourite suitable candidates for this purpose.

Floral and Hardys Five Favourite Bog Plants:

Astilbe

Astilbe is a clump-forming herbaceous perennial with feathery flowers of pink, white or red in summer. Its young foliage has a bronzy appearance turning dark green through summer and autumn, while those flower heads will turn brown and remain attractive later in the year.

Darmera peltata

The Umbrella Plant is a vigorous perennial that forms large clumps of rounded green, and then pink, foliage that will show in summer and autumn respectively. They also produce clusters of pink, star-shaped flowers in the spring.

Gunnera manicata

The Giant Rhubarb is a large, bold, herbaceous perennial sporting huge green leaves for most of the year, and red russet blooms throughout summer alongside its Christmas hued fruits. A spectacular, architectural plant, but suited only to the larger garden as it can reach a height of 2.5metres in a single season and a spread, over time, of 4 metres!

Ligularia dentata Desdemona

Desdemona will bloom with daisy-like, bright sunny orange flowers with lance shaped petals springing from a deep red inflorescence. Its foliage will appear bronze, purple and green from spring to autumn and its colours should tower around a metre above the waterline of your bog.

Zantedeschia aethiopica

The Arum Lily can be a deciduous or semi-green perennial forming emerald-green, lance-like leaves around a hooded white flower with funnel appearance. These will bloom in early summer are followed by orange fruit in the autumn.

4 Sep

Help Your Home With Some Home Improvement

The idea of improving one’s home is practically as old as the concept of home itself. Everyone wants the best possible home. Read on to pick up some tips and tricks that can smooth your way through all sorts of great home improvement projects.

When thinking about home improvement, make certain you monitor surroundings and even then just make improvements that are logical. For example, it is not a wise invest to install a sun room with no insulation in the colder climates. Build what you want to, but try not to go beyond what will be useful in your climate.

Organize different items in your garage by putting them into clear plastic boxes. Write on the bins to indicate what is inside them. Also, get stackable ones if possible. This allows you to keep your garage organized while keeping bugs and rodents at bay.

When remodeling the tile floors, consider more high-tech options such as tiles that radiate heat. Your electricity allow these to provide heat. Luckily, it’s easy to install them yourself if you are able to follow instructions. This is a simple project that is easy to add to the overall project regardless of whether you are doing it yourself or hiring someone else. You will be happy you did when you go into your bathroom on that first day of winter.

Get references from anyone you hire to do improvements at your home. In essence you are hiring an employee to do a job for you. Do your homework and check all of their references.

Don’t neglect the bathroom when you’re going to sell your house. Living rooms and bedrooms are quite changeable by the new occupants of the home, but a bathroom is far more costly to update, so it needs to be in good shape from the start. Make sure your tub/shower and sinks are all up to par, and if they aren’t, replace them. Floors made of linoleum may look pretty good and go in rather quick, but they should always be swapped out for a professional tile finish.

Successful home improvement projects are within the grasp of any homeowner that takes the time to learn and prepare ahead of time. However, home improvement projects aren’t always as simple they appear, and you should be careful when starting one. You might run into additional issues as you start working on a project or find that the tools you have are not adapted to the situation.